Research Area:  Internet of Things
On this research, Internet of Things (IoT) as an advanced technology is used to monitor the height of trash from a trash can in order to give notification whether the height of trash is already reaching the maximum height limit or not. To support those needs, we used NodeMCU as a microcontroller, ultrasonic sensor, MQTT as IoT protocol, and Android to display the data. After we did the system performance test, we had the biggest result of end-to-end delay which was 2.06875 seconds when the packet delivery was set to 1000 ms with 3 active nodes and the smallest result of end-to-end delay which was 0.26055 seconds when the packet delivery was set to 100 ms with 1 active node. The biggest result of throughput was 597.17 Bytes/s when the packet delivery was set to 100 ms with 1 active node and the smallest result of throughput was 75.86 Bytes/s when the packet delivery was set to 1000 ms with 3 active nodes. The biggest result of availability and reliability was 99.905% when the packet delivery was set to 1000 ms and the smallest result was 99.833% when the packet delivery was set to 100 ms.
Keywords:  
Author(s) Name:  Achmad Auliyaa Zulfikri, Doan Perdana, Gustommy Bisono
Journal name:  The JURNAL INFOTEL
Conferrence name:  
Publisher name:  Lembaga Penelitian dan Pengabdian Masyarakat (LPPM)
DOI:  10.20895/infotel.v10i3.381
Volume Information:   Vol 10, No 3
Paper Link:   https://ejournal.st3telkom.ac.id/index.php/infotel/article/view/381